5-Year Money-Back Guarantee
Literally glues paint to help prevent peeling.
Paint Glue Hi-Performance Bonding Agent Primer helps bind down flaking, peeling, and chalking paint on properly prepared exterior surfaces. Fast drying, tintable, and transparent when dry, this tacky bonding primer helps lock your topcoat to the substrate for a stronger exterior coating system. Use as Step 1 before applying Paint Glue Hi-Performance Exterior Coating.
Same-day topcoat
Tintable
Superior sealing & hiding
155
sq ft / gallon*
5-Year Guarantee
Money-back protection
Fast Drying
Touch 30 min–1 hr
Soap & Water
Easy clean-up
Tintable
Match your topcoat
The two-step system
Prime green. Finish orange.
A complete Paint Glue system — green Bonding Agent primer first, then the orange Hi-Performance Exterior Coating top coat.
Step 1 — Prime
Paint Glue Bonding Agent
Binds flaking & peeling paint
- Best forFlaking / peeling paint
- Coverage155 sq ft / gal*
- Wet film10–15 mils WFT
- Temp rangeAbove 45°F / below 99°F
- Formats1 gal · 5 gal pail
- Guarantee15-year money-back
Step 2 — Finish
Paint Glue Top Coat
Hi-performance exterior finish coat
- Best forFinish over Paint Glue primer
- System roleTop coat
- PrimerPaint Glue Bonding Agent
- UseExterior coating
- Formats1 gal · 5 gal pail
- PackagingOrange label
The lineup
Shop all Shop the Paint Glue system
Green bonding primer plus orange exterior top coat — in 1-gallon DIY cans and 5-gallon contractor pails.
Application
How to apply Paint Glue
Brush, roller, or airless spray. Follow the label and stir thoroughly before and during application.
01
Prep the surface
Surface must be cured, clean, dry, sound, and free of dirt, grease, oils, waxes and mildew. Scrape or sand off loose, scaling, chalked, cracking or peeling paint.
02
Stir & load
Stir thoroughly before and during application. Apply by brush or roller to work primer into surface pores — do not thin.
03
Lay it on
Roller: even, generous coat at 10–15 mils WFT in a 'W' / crisscross motion, keeping a wet edge. Airless spray: 2000+ psi, back-roll to work into pores.
04
Dry & topcoat
Dry to touch in 30 min–1 hr. Recoat in 2–3 hrs or overnight. Apply your tinted top coat the same day.
Temperature
Bonding Agent: above 45°F / below 99°F. Apply the top coat after proper dry time and surface prep.
Clean-up
Clean minor spills, tools and spray gear with soap and water. Do not thin.
New masonry
Let new cementitious substrates cure 30–45 days per industry standards.
Our promise
The 5-Year Money-Back Guarantee
Prime 100% of your next project with Paint Glue according to our instructions. If you don't get at least 5 years without seeing peeling paint, return your original receipt with before & after pictures for a full refund of the purchase price. See website for refund details.
RetailContractorAmazonTikTok ShopPro Counter
5 Years
No peeling — guaranteed
Pro-grade
Trusted on production jobs
Transparent dry
Stays tacky, binds topcoat
Low VOC
Not to exceed 2.1 lb/gal
Questions
Application FAQ
Can I topcoat the same day?
Yes. Paint Glue is fast drying — dry to touch in 30 minutes to 1 hour and ready for recoat in 2–3 hours, allowing same-day application of your top coat.
Is Paint Glue tintable?
Yes. Paint Glue is tintable to match the color of your top coat and provides superior sealing and hiding. It dries transparent and stays tacky, binding paints to the substrate.
Interior or exterior?
Paint Glue Bonding Agent and Paint Glue Top Coat are positioned for properly prepared exterior surfaces.
What about lead paint?
Scraping, sanding, or removing old paint may release lead dust, which is toxic. Wear a NIOSH-approved respirator, clean up with a HEPA vacuum and wet mop, and contact the National Lead Information Hotline at 1-800-424-LEAD or epa.gov/lead before you start.